Bidding has ended on this item.
Current Auctions / TRACY CALIFORNIA WAREHOUSE AUCTION 73, OVER 25 LOTS UP FOR AUCTION
#LOTT73-PRECPM
item
item
item
item
item
item
item
item
item
item
item
item
item
item
item
item
item
item
item
item
item
Ask Seller
A Question

BIESSE "STREAM B1 5.5 SERIES" AUTOMATIC EDGEBANDER, YEAR 2013 Ended

OVER 25 LOTS UP FOR BID WAREHOUSE AUCTION, TRACY CALIFORNIA

  • Winning Bid : $5,200.00 USD Sold
  • 55 Bid(s)
  • High Bidder: D****3
Documents
Bidding Info
This auction uses Proxy Bidding.
Bids placed within the final 5 minutes will extend the auction closing time by 5 minutes.
img

TRACY CALIFORNIA WAREHOUSE AUCTION 73, OVER 25 LOTS UP FOR AUCTION ( Closed #17332105 )

TRACY CALIFORNIA WAREHOUSE AUCTION 73 CONSISTS OF OVER 25 ITEMS UP FOR BID TO THE HIGHEST BIDDER. ALL ITEMS HAVE BEEN RELOCATED TO TRACY CALIFORNIA WAREHOUSE FOR THE CONVENIENCE OF BUYERS. ITEMS INCLUDE 2013 BIESSE STREAM B1 AUTOMATIC EDGEBANDER, TIGER STOP, VIRUTEX HOT AIR EDGEBANDER, NORTHFIELD UPCUT SAW AND MUCH MORE. AUCTION CLOSES ONLINE AT MACHINERYMAX.COM STARTING AT 11:00 AM PACIFIC TIME ON TUESDAY, AUGUST 6TH, 2019. IF YOU WOULD LIKE TO VIEW ITEMS PRIOR TO AUCTION CLOSE, PLEASE EMAIL KIRK@MACHINERYMAX.COM OR CALL 209-832-0100

VIEW EVENT
Image 1

Description & Information
Image 2

Bid History
Image 3

Value Added Services
Image 4

Terms & Conditions

  • Pick Up Location

    1905 N. MACARTHUR DRIVE, SUITE 110, TRACY CALIFORNIA 95376

  • Make

    BIESSE

  • Model

    BIESSE EDGE STREAM B1

  • Serial Number

    61931

  • Year

    2013

  • Phase

    3 PHASE

  • Voltage

    460 VOLT

  • Load Out Period

    AUGUST 14TH, 2019

  • Estimated Dimensions

    EMAIL OR CALL 209-832-0100 OR KIRK@MACHINERYMAX.COM

  • Estimated Weight

    APPROXIMATELY 8200 LBS.

  • Seller Comment

  • page views

    1943

BIESSE MODEL #STREAM B1 HEAVY DUTY AUTOMATIC EDGEBANDER

YEAR 2013 BUILT MACHINE

460 VOLT, 3-PHASE

SERIAL #61931

***SPECS TO FOLLOW:

2013 STREAM B1/5.5 Edgebander

 

N0000001    SINGLE-SIDED EDGE BANDING MACHINE  STREAM B1/5.5

 

TECHNICAL DATA

Description            Um       Min     Max

Panel overhang (fixed)        mm        35

Panel thickness            mm        10      60

Chain advance speed        meters / min 10 – 25 Variable

Work table height        mm         950

Panel working width        mm       100 - 3200

Panel length            mm       150 - 3200

 

NOTE : Maximum machine capabilities (work speed, edge thickness, adjusting ranges) are 

conditioned by the capabilities of the single units installed.

 

BASE MACHINE STANDARD EQUIPMENT 

Top Belt pressure beam with Double  “V” profile

Electronic pressure beam height adjustment 

Inverter for track speed adjustment 

Separate Inverter on every work unit

PC operator interface; Windows XP

Statistic software with export system on Excel file. Infinite Log file 

Base frame dust extraction 

 

INPUT/OUTPUT

Feeder guide adjustable according to the machining edge being used, with mechanical digital display.

 

BASE

Base made of electro-welded elements stabilised to form a single, monolithic, high-rigidity structure. 

It rests on the ground on a suitable number of cross-bars, each of which is fitted with adjustable feet and 

set up to be anchored to the floor.

Auxiliary suction and dust collection system along the base, with D.160 suction mouth on one side of the machine.                                                              

 

DRIVE CHAIN

The drive chain comprises a high precision, minimum distortion chain (50.8 mm links). Free, straight advance is guaranteed by the presence of guides, which are round on one side and flat on the other, both tempered and 

rectified, housing slide blocks made of techno-polymer and self-lubricating material .

The panel rests on high grip, rectified, stain-proof rubber tables.

The speed of the drive chain is continuously adjustable from 10 to 25 m/min. by INVERTER controlled directly from the NC, with rapid braking function.

The drive pinions are made of heat tempered, high-strength steel.

                                          

TOP BELT PRESSURE

The top presser comprises a rubber belt with a stain-proof coating.  The thrust exercised on the panel is provided by springs housed on technopolymer connecting rods. The whole assembly is fitted on a extruded aluminium structure, whose section guarantees high rigidity .

                                                                 

SOUND-PROOF CABIN FOR EDGEBANDING SECTION

All the units fitted with rotating tools are located inside cabins coated with sound-proofing material. 

During machining, the units can be viewed through wide, transparent polycarbonate windows. 

If the doors are opened at unauthorised times this will trigger an emergency and shut down the machine.

Internal lighting provided by anti-glare neon lights.

Suction hoods of each unit are connected through pipes to individual exits placed in the upper part of the cabin. 

 

MECHANICAL PANEL SPACER FOR B1  

Device allowing manual introduction of panels only when the distance between panels is enough for working.  

Distance between panels is set up on NC.  

 

AUTOMATIC TRACK LUBRICATION B1  

 

PANEL PIECE SUPPORT

Side piece support supporting the panels as they pass through the machine.

Fixed supports, nr. 1 manually adjustable roller bar.

 

PC FLAT SCREEN NUMERICAL CONTROL COLOR GRAPHICS

Multiple axis numerical control  with PC interface for management of single edgebanding machines or complete 

edgebanding lines.

                      

Main SOFTWARE characteristics:

Windows XP Professional Operating System

SINTRA machine control software, based on Windows XP like interface

Electronic axes positioning (machine set-up)

Electronic feed chain speed adjustment

Electronic pressure height adjustment according to panel thickness

Automatic management of edge banding coils exchange device.

Management of machining list

Automatic management of coil magazine by codes

Cascade type motor start-up

Management of diagnostics

Video capable

 

CE SAFETY FEATURES

The machine is manufactured to comply with EC safety regulations.

 

N0000015    NC Y AXIS FOR FEEDER GUIDE

The kit includes motorised movement of the machine feeder guide and relevant NC management

 

N0000136    SPRAYING LIQUID APPLICATION UNIT

Device for the application of liquid using nozzles located above and below the panel.

It can be used with the following liquid types:

  •     ïAnti-adhesive liquid
  •     ïAnti-static liquid
  •     ïCleaning liquid 

Manual adjustment of nozzle direction.

 

N0001294    ANTIADHESIVE LIQUID

Avoids the adherence of any glue waste on the panel surfaces.

 

N0000669    PRE-MILLING UNIT RT20

Milling unit comprising two vertical axis motors with timed pneumatic drive. The unit can be adjusted manually according to the panel overhang, by digital position indicator.

Maximum workpiece thickness with standard tool : 40 mm. For panels with thickness up to 60 mm, it is necessary to use diamond tool with height 

63 mm, code N0000336.

 

TECHNICAL DATA    

Description                             Um   Min      Max

Tool rotation speed                         RPM 9000

Motor size                             kW        3,5 + 3,5

Shaft (diameter x length)                     mm   30 x 50

Tool dimensions (diameter x height x bore)         mm   125 x 43 x 30

Pneumatic drive stroke                         mm    10

2 dust hoods                             mm    80

Inverter                              Included

Tools provided                             DIA included

 

N0000336    SUPPLEMENT PAIR DIAMOND MILLING CUTTERS FOR H=60 ON RT UNIT

Pair of diamond milling cutters 125x63x30 to replace the standard ones 125x43x30.

 

N0000469    GLUING UNIT SP20

Gluing unit used to glue:

  •     ïstraight edges in coils: in melamine resin, ABS, PVC, PP, veneer
  •     ïedges in strips: solid wood, HPL

Use of EVA-based thermoplastic adhesives. 

The glue is spread on the edge of the panel using a knurled roller.

 

Main characteristics:

  •     ïHighMelt patented system with separated glue and pot applications.
  •     ïPatented system for quick frontal extraction of glue pot, by rotating device.
  •     ïPatented High-Melt pre-melting device
  •     ïShafts ans reducers for the top handling
  •     ïPair of infra-red lamps, top and bottom, used to heat the panel
  •     ïGlue pot and head teflon coated.
  •     ïGuillotine type batching device for glue roller, accessible from the operator side
  •     ïCopier to optimize the glue quantity spread on the panel
  •     ïSensor to detect the glue level inside the bowl 
  •     ïAutomatic start-up of the glue spreader roller on reaching optimum working temperature
  •     ïAutomatic disabling of the glue spreader roller on stoppage of the machine.
  •     ïGlue spreader roller rotation speed electronically synchronised with the feed chain speed
  •     ïGranule tank with vertical magazine fitted directly on the pre-melting device 
  •     ïEdge presence detection device (using photocell)
  •     ïIndependent edge insertion/clamping device for each position (only with codes N0000682, N0000683, N0000804).
  •     ïPin rollers driving the wooden strips (up to 20 mm) 
  •     ïStrip magazine (thickness up to 20 mm) with pre-loading side pusher device.
  •     ïSuction cup strip loading device.
  •     ïHorizontal edge magazine for one coil
  •     ïAbility to change edge automatically (NC managed) (only with codes N0000682, N0000683, N0000804).
  •     ïEnd of roll indicator light, with stoppage of movement if a panel is signalled and there is no edge (only with codes N0000682, N0000683, N0000804).
  •     ïHorizontal cutter to cut material in rolls: this is suitable for edge materials in: melamine resin, PVC, ABS, PP, veneer up to 3 mm thickness 
  •     ïNC Y axis for presser section: The kit includes motorised edge banding strip presser section drive and relative NC management

 

The pressing area includes:

  •     ïNo. 1 presser roller D.150 driven by inverter
  •     ïNo. 6 idle presser rollers D.65
  •     ïNr.1 additional panel presser device

 

TECHNICAL DATA

Description                    Um    Min    Max

Edge thickness in malamine and plastic        mm    0,3    3

Maximum cutting section cutter            mm          135 (3 x 45)*

Wooden edge thickness                mm        20

Panel thickness                    mm    10    60

Edge height                    mm    15    65

Edge in coils length                mm    150

Edge in strips length                mm    200

Solid wood length for B1 MDS            mm        1950

Glue pot capacity                kg               1,3

Tank capacity                    kg        7

Spreading capacity                Kg/h                7

Coil diameter                    mm               800

*Maximum cutting section is guaranteed on PVC edges, for different edge materials, this value could be lower.

 

N0000683    6 POSITIONS EDGE MAGAZINE FOR SP10, SP20, SP30, SP40

Six position container for rolls of edge banding strip. 

The rolls are supported by a cradle of rollers, so that they do not require any other 

locking devices: this makes them extremely quick to replace.

Automatic edge changement, NC managed

Edge banding strip presence detection device (using photocell), also when the one 

working is finishing and the other is the same edge type.

Positioning of photocells for edge detecting device and for edge magazine can control a maximum panel length of 2700 mm.

To obtain the control of  the edge roll ending on a panel longer than 2700 mm it is necessary to place the edge magazine at a right 

distance. The distance (if different from the standard 2700) must be comunicated when ordering the machine.

 

N0000367    END-TRIMMING UNIT IT90-S

Edge trimming unit complete with 2 motors, for edge banding strips with a thickness of up to 3 mm.

Motors can be inclined on the vertical axis by between 0° and 25° with automatic rotation.

Device to move the trimmer away rapidly during operation.

Micrometer adjustment of side copiers.

Automatic disabling of the unit when motors are stopped.

Central lubrication of slide guides.

Pneumatic drive of two end-trimming units.

 

 TECHNICAL DATA

 Description                    Um    Min    Max

 Speed                        Rpm    12,000

 Motor size                    kW    0.3 + 0.3        

 Feed chain speed                m/min        28

 Edge thickness                    mm    0.3    3

 Panel thickness                mm    10    60

 Interval between 2 successive panels        mm    350

 Inverter                     Included

 Minimum panel overhang            mm    30

 Tools provided                    Widia included

 

N0001150    FINE MILLING UNIT RF40

Unit comprising 2 independent motors, which are complete with horizontal and vertical copiers and swings 

on slides.

Vertical movement of the top unit associated with the belt presser.

Continuous automatic adjustment of tool position with respect to the material using a DC motor applied 

to the group drive.

The position is controlled directly by the machine control system.

In this way it is possible to use tools with a MULTIPROFILE on the unit, allowing the profile/shape to be 

changed without having to change the tool.

Automatic pneumatic disabling of the unit from the control panel.

 

TECHNICAL DATA

Description                Um    Min    Max

Speed                    Rpm    12.000

Motor size                kW    0,65 + 0,65

Panel thickness                mm    10    60

Shaft (diameter x length)        mm    16 x 20    

Inverter                 Included

Tools provided            Yes, multi-profile widia cutter Bevel 25°,   

 

N0001156    FINE MILLING UNIT MOTORS 2 KW RF10

 

N0001178    PAIR OF WIDIA CUTTERS FOR RF30/RF40 BEVEL 25° - R=1/2/3

 

N0001004         GLUE SCRAPER RC20

It allows to remove any glue excess from the flat surfaces of the panel close to the edges.

The unit is equipped with 3+3 vertical copiers with bearings .

Equipped with suction hoods.

Complete with spraying device for tool cleaning.

Automatic unit disabling.

 

N0000171    SUPERIMPOSED OSCILLATING BUFFERS UNIT SZ30

The unit includes 2 motors.

The buffer's position is adjusted by an exclusive 3D recording device by means of a ball joint.

The motors are fitted on a single column and are axially offset from one another to allow pneumatic insertion 

and removal of the brushes and the pneumatic swing motion that optimises wear on the brushes themselves.

Vertical movement of the top motor is coupled to the presser to provide automatic adjustment according to the 

thickness of the panel. 

The unit is supplied complete with fabric brushes.

Automatic disabling of the unit when motors are stopped.

 

TECHNICAL DATA

Description                    Um    Min    Max

Brush rotation speed                Rpm    1,400

Motor size                    Kw     0,37 + 0,37

Shaft (diameter x length)            mm     20 x 40

Brush dimensions (diameter x width)        mm    150 x 40

 

N0000300    AIR CONDITIONING SYSTEM FOR B1

 

N0000225    VOLTAGE OTHER THAN 380V B1

 

The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.

The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.

Please log in to view the bid history

LOADING FEES WILL BE ADDED TO EACH LINE ITEM SO PLEASE CHECK LOAD FEES ASSOCIATED WITH ITEMS THAT YOU ARE BIDDING ON.  LOAD FEES ARE FOR LOADING ONTO FLAT BED TRUCK OR TRAILER ONLY.

CONTACT ALWAYS TRUCKING 541-608-6532
$0.00 USD
LOADING FEE
$200.00 USD

PAYMENT IS DUE WITHIN 24 HOURS OF AUCTION CLOSE TIME.  CREDIT CARD WILL BE ACCEPTED FOR PAYMENT FOR INVOICES UNDER $2000.00 HOWEVER A 2% PROCESSING FEE WILL BE ADDED TO THOSE INVOICES PAID VIA CREDIT CARD.  ALL INVOICES OVER $2000 REQUIRE WIRE TRANSFER, CASHIERS CHECK, CASH, OR APPROVED COMPANY CHECK.

PLEASE CONTACT SABRINA @ 209-832-0100 WITH ADDITIONAL PAYMENT QUESTIONS.

Terms & Conditions

Please read carefully before continuing

Unless otherwise modified by the terms of a separate user agreement applicable specifically to the use of MachineryMax INC, and only as to the use of the particular MachineryMax INC Website to which the separate user agreement applies, this User Agreement ("Terms of Use"), including the Privacy Policy and any terms linked to this Agreement, governs and applies to MachineryMax INC whether presently in existence or established in the future. Before you may become a registered user on any MachineryMax INC Website, you must read and accept all of the terms in, and linked to, this Agreement. If you do not agree to this Agreement, you may not use MachineryMax INC Website to buy, sell or bid for goods, or use any other services offered by the Company on any MachineryMax INC Website. This Agreement is effective on January 1, 2024 for current users, and upon acceptance for new users. By accepting this Agreement, you also agree that your use of MachineryMax INC Website may be governed by a separate user agreement, website rules and privacy policy. The user agreement, website rules and privacy policy that applies to the MachineryMax INC Website always appears in the footer of each website.

We may amend this Agreement at any time by posting the amended Agreement on our MachineryMax INC Website. An amended Agreement shall automatically be effective 15 days after it is initially posted on our MachineryMax INC Website. Your continued use of MachineryMax INC Website after our posting of any changes will constitute your acceptance of such changes. This Agreement may not be otherwise amended except in a writing hand signed by you and the Company. Notwithstanding any other provision of this Agreement, for purposes of this provision, a "writing" does not include an e-mail message and a signature does not include an electronic signature.

1. MACHINERYMAX INC WEBSITE IS ONLY A VENUE OR MARKETPLACE 
Each MachineryMax INC website is only a venue or marketplace for our users to offer, sell and buy many different items. Our role is only to provide a venue for listings, bids and acceptances, and facilitate the exchange of information between buyers and sellers. We are not involved in forming the actual transaction between buyers and sellers, we are not an agent of buyer or seller, and we do not take title to the items at any point in the sales process. Any agreement reached by a buyer and seller with respect to the terms of sale for an item is solely between such buyer and seller. As a result, we have no control over and do not guarantee the quality, safety, or legality of items listed for sale, the truth or accuracy of seller's listings, the ability of sellers to sell items, the ability of buyers to pay for items, or that a buyer or seller will actually complete a transaction.  Machinerymax reserves the right to  temporarily suspend a new buyers account to verify available funds should bidding exceed a specific amount.

2. DISPUTES BETWEEN USERS; RELEASE OF THE COMPANY 
You will not hold MachineryMax INC responsible for any user's actions or inactions relating to the purchase and sale of items listed on MachineryMax INC Website. If you have a dispute with one or more users, you release tMachineryMax INC, its subsidiaries and affiliates, and their respective officers, directors, agents, employees and third party suppliers, from claims, demands and damages (actual and consequential) of every kind and nature, known and unknown, suspected and unsuspected, disclosed and undisclosed, including without limitation those claims, demands and damages based in whole or in part upon the Company's negligence, gross negligence, statutory liability or strict liability, arising out of or in any way connected with such dispute. If you are a California resident, you waive California Civil Code 1542, which says: "A general release does not extend to claims which the creditor does not know or suspect to exist in his favor at the time of executing the release, which if known by him must have materially affected his settlement with the debtor."

3. LIMITATION OF LIABILITY BETWEEN BUYER AND SELLER 
FOR ANY TRANSACTION BETWEEN BUYER AND SELLER ON MACHINERYMAX INC WEBSITE, BUYER AND SELLER AGREE AS FOLLOWS:

(a) ALL ITEMS LISTED ON THE MACHINERYMAX INC WEBSITE ARE SOLD "AS IS, WHERE IS" WITH NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, UNLESS OTHERWISE EXPRESSLY SET FORTH IN THE TERMS OF SALE FOR SUCH ITEM AND LABELED AS A "WARRANTY".

(b) IN NO EVENT SHALL BUYER OR SELLER BE LIABLE TO EACH OTHER FOR SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES OF ANY KIND, OR ANY LOST REVENUE OR ANTICIPATED PROFITS, ARISING OUT OF OR IN CONNECTION WITH SUCH TRANSACTION.

(c) IN NO EVENT SHALL THE LIABILITY OF SELLER TO BUYER, OR BUYER TO SELLER, FOR ANY SUCH TRANSACTION EXCEED THE PURCHASE PRICE OF THE PURCHASED ITEMS AND, IF THE PURCHASED ITEMS HAVE ALREADY BEEN RELEASED TO BUYER, THE REASONABLE LOGISTICS COSTS INCURRED BY BUYER FOR THE TRANSPORTATION AND STORAGE OF THE PURCHASED ITEMS.

4. PAYMENT TERMS 
After selection of the winning bid on MachineryMax INC website, the winning bidder is required to pay the agreed purchase price and other fees to the Seller. 

All payment are due (1) business day following the sale date.   Seller accepts the following payment methods:  Bank Wire Transfer

The Seller is soley responsible for collecting payment and verifying funds in full before shipping any item unless otherwise specified in Sellers listing instructions. 

MachineryMax INC will charge a Buyers Premium and Sellers Premium (unless auction specifies otherwise), which is due in full at the end of business concluding the successful auction.  Buyer and Seller both agree to have these fees automatically debited from the Credit Card listed on file at the time of registration.  In the event that there are insufficient funds to cover the outstanding amount due, MachineryMax INC reserves the right to pursue legal action which includes, but not limited to collections and or legal action.

Default. If, after Two (2) business days (which includes a two (2) business day grace period) following the close of an Auction, you have not made full payment of the Final Selling Price and all other applicable fees, you are in default and shall be subject to a Default Fee of 15% of the final closing price.

Your failure to pay MachineryMax the Final Selling Price for your winning bid costs MachineryMax time and money. Your failure to pay can impact the reputation of MachineryMax to expedite the payment to the Seller for the auction you won but did not pay for. Likewise, if MachineryMax has to re-run the goods at auction, such re-listing may delay or impede the ability of MachineryMax to deliver on contractual obligations owed to others.

For total amounts you are obligated to pay but do not pay of over $10,000.00, MachineryMax has the right but not the obligation to file suit against you in any state or federal court with subject matter jurisdiction, and you shall pay all attorney fees and costs incurred by MachineryMax arising out of your failure to pay. The damages you pay shall be equal to the total amount of your bid plus interest at 1% per month on the total amount you have failed to pay. You waive all rights of notice, acceleration, declaration of default, and presentment. You waive all rights to jury trial on any matter arising out of allegations of your failure to pay.

By registering and using MachineryMax INC Website, you acknowledge that you have read, understood, and agree to these Terms & Conditions. If buyers are registered online, acceptance is recorded electronically via clickwrap at the time of registration, including the date and time of acceptance.

Buyer is responsible for any sales or use tax.

5. LISTING REQUIREMENTS; LICENSE; EXCLUSIVITY 
When you list goods for sale on MachineryMax INC Website, you represent and warrant that you have the authority to sell such goods, free and clear of any liens, claims or other encumbrances. You further agree to use commercially reasonable efforts to supply accurate information for each listing, and will be solely responsible for the listing information you provide. When you give us content for a listing of goods, you grant us a non-exclusive, worldwide, perpetual, irrevocable, royalty-free, sublicensable (through multiple tiers) right to exercise any and all copyright, trademark, publicity, and database rights (but no other rights) you have in the content, in any media known now or in the future.
When you list an item for sale on MachineryMax INC Website, you agree that during the period in which the item is posted in an online auction on the MachineryMax INC Website (the "Exclusivity Period"), the Company shall have the exclusive right to sell such item. You further agree that during the Exclusivity Period you will solicit and accept offers on the item only through the MachineryMax INC Website on which the item was posted for sale. If you solicit or accept, through any means other than the MachineryMax INC Website on which the item was posted for sale, any offer on any such item during the Exclusivity Period you agree to pay the MachineryMax INC a Commission Fee of 10%, as if such item had been sold through a completed online auction.

6. ELIGIBILITY AND REGISTRATION 
The MachineryMax INC Website are available only to individuals and entities that can form legally binding contracts under applicable law, and are not available to minors. You represent and warrant that (i) all user information provided during registration is accurate and complete, and (ii) you will update such user information from time to time so that it is kept current, accurate and complete at all times. If you are registering with the Company as a business entity, you represent that you have the authority to legally bind that entity. You are solely responsible for all conduct and transmissions that take place under your user name and password. The Company may ask for additional information at any time to verify your registration information. The Company may, in its sole and absolute discretion, refuse to accept a party's registration.

7. USER RESPONSIBILITIES 
When using MachineryMax INC Website, you agree that you will not do any of the following:

  • Violate any laws or the specific Rules or Policies for MachineryMax INC Website
  • Violate or infringe, or cause the Company to violate or infringe, the intellectual property or other rights of any third party, including copyright, trademark, trade secret, privacy or other proprietary rights
  • Fail to deliver payment for items purchased by you
  • Fail to deliver goods purchased from you
  • Manipulate the price of any posted item, whether by bidding through a secondary account or other party, by communicating with other buyers, by shill bidding or by any other means
  • Copy, reproduce, modify, create derivative works from, distribute, or publicly display any content (except for your information) from any MachineryMax INC Website without the prior express written permission of the Company

Without limiting other remedies, we may limit, suspend or terminate a user's registration and access to the MachineryMax INC Website at any time if we believe, in our sole discretion, that you have breached this User Agreement or otherwise engaged in any inappropriate behavior on any of the MachineryMax INC Website.

8. DISCLAIMERS 
THE MACHINERYMAX INC WEBSITE IS PROVIDED BY THE COMPANY ON AN "AS IS", "AS AVAILABLE" BASIS.
TO THE FULLEST EXTENT PERMISSIBLE BY APPLICABLE LAW, THE COMPANY DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE OPERATION, ACCESSIBILITY OR SECURITY OF THE MACHINERYMAX INC WEBSITE, AND THE ACCURACY, COMPLETENESS, CURRENCY OR RELIABILITY OF ANY OF THE CONTENT OR DATA FOUND ON THE MACHINERYMAX INC WEBSITE INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. SOME STATES DO NOT ALLOW THE DISCLAIMER OF IMPLIED WARRANTIES, SO THE FOREGOING DISCLAIMER MAY NOT APPLY TO YOU.

THE COMPANY DOES NOT WARRANT THAT THE MACHINERYMAX INC WEBSITE OR THE FUNCTIONS, FEATURES OR CONTENT ON THE MACHINERYMAX WEBSITE WILL ALWAYS BE AVAILABLE, ACCESSIBLE, UNINTERRUPTED, AND SECURE OR OPERATE WITHOUT ERROR.

THE COMPANY EXPRESSLY DISCLAIMS ANY RESPONSIBILITY FOR ANY MISREPRESENTATIONS OR BREACHES COMMITTED BY ANY BUYER OR SELLER.

9. LIMITATION OF LIABILITY OF COMPANY 
IN NO EVENT SHALL MACHINERYMAX INC BE LIABLE FOR ANY LOSS, CLAIM, DAMAGE OR EXPENSE, OR ANY SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS, DIRECTLY OR INDIRECTLY ARISING OUT OF YOUR USE OF OR INABILITY TO USE ANY OF THE MACHINERYMAX INC WEBSITE. SOME JURISDICTIONS MAY NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSIONS SHALL ONLY APPLY TO THE EXTENT PERMISSIBLE UNDER APPLICABLE LAW.

IF, NOTWITHSTANDING THE FOREGOING, THE COMPANY SHOULD BE FOUND LIABLE FOR ANY LOSS OR DAMAGE (WHETHER IN CONTRACT OR TORT) WHICH ARISES OUT OF OR IS IN ANY WAY CONNECTED WITH THIS AGREEMENT OR THE USE OF ANY OF THE MACHINERYMAX INC WEBSITE, THE LIABILITY OF THE COMPANY TO YOU OR ANY THIRD PARTY SHALL IN NO EVENT EXCEED, IN THE AGGREGATE, THE GREATER OF (A) THE FEES PAID TO THE COMPANY WITH RESPECT TO THE PARTICULAR TRANSACTION GIVING RISE TO SUCH LIABILITY, OR (B) US$1,000.

10. INDEMNIFICATION 
You shall indemnify, defend and hold harmless MachineryMax INC, its subsidiaries and affiliates, and their respective officers, directors, employees, agents and third party suppliers (collectively, the "Company Group"), from and against any and all claims, losses, damages, liabilities, judgments and fees and expenses related thereto (including, without limitation, reasonable attorneys' fees), brought by or on behalf of any third party against any of the Company Group that arises out of:

(a) Any breach or violation by you of this Agreement, including, without limitation, any breach of your representations, warranties or covenants contained herein,

(b) Any dispute with another user relating to your purchase or sale of items on an MachineryMax INC Website, or

(c) Any personal injury, death or property damage caused by or arising out of the subsequent use of the goods sold or purchased by you on any MachineryMax INC Website.

11. TERMINATION OF USAGE 
This Agreement is in force until terminated by either you or Company. If you disagree with this Agreement, your sole remedy is to terminate your use of the MachineryMax INC Website. Upon any termination of this Agreement, all obligations of either party set forth herein which relate to transactions by such party prior to such termination shall survive such termination and continue in effect.

12. APPLICABLE LAW AND VENUE; WAIVER OF JURY TRIAL 
This Site is controlled by MachineryMax INC from its offices within the State of Florida, United States of America. The laws applicable to the interpretation of this Agreement shall be the laws of the State of Florida, without regard to any conflict of law provisions.
You agree that any action at law or in equity arising out of or relating to this Agreement shall be filed only in the state or federal courts of Charlotte County , Florida, U.S.A., and that you hereby consent and submit to the exclusive jurisdiction and venue of such courts. No action arising under or relating to this Agreement may be brought by either party more than two years after the cause of action has occurred.

YOU KNOWINGLY, VOLUNTARILY AND INTENTIONALLY WAIVE THE RIGHT TO A TRIAL BY JURY IN ANY LITIGATION ARISING OUT OF, UNDER, OR IN CONNECTION WITH THIS AGREEMENT, YOUR USE OF MACHINERYMAX INC WEBSITE OR ANY COURSE OF CONDUCT, COURSE OF DEALING, STATEMENTS (WHETHER VERBAL OR WRITTEN) OR ACTIONS OF ANY PERSON.  THIS PARAGRAPH IS A MATERIAL INDUCEMENT FOR YOU AND THE COMPANY TO ENTER INTO THIS AGREEMENT. 

The scope of this waiver is intended to be all-encompassing of any and all disputes that may be filed in any court and that relate to the subject matter of this Agreement, including without limitation, contract claims, tort claims (including fraud in the inducement), breach of duty claims and all other common law and statutory claims. THIS WAIVER OF JURY TRIAL IS IRREVOCABLE, MEANING THAT IT MAY NOT BE MODIFIED EITHER ORALLY OR IN WRITING, AND THIS WAIVER SHALL APPLY TO ANY SUBSEQUENT AMENDMENTS, RENEWALS, SUPPLEMENTS OR MODIFICATIONS OF THIS AGREEMENT.  In the event of litigation, this provision may be filed as a written consent to a trial by the court.

13. COMPANY COPYRIGHT AND TRADEMARKS 
The trademarks, tradenames and all other material contained on the MachineryMax INC Website, including all portions of the websites, site design, text, graphics, and all intellectual property rights thereto are the sole and exclusive property of the Company or its licensors. Except as expressly permitted hereby, the use of any such intellectual property for any other purpose, or the modification, distribution or republication of such material without the prior written permission from the Company, is strictly prohibited.

14. ELECTRONIC COMMUNICATIONS AND AGREEMENTS 
You consent to receive communications from us electronically. We will communicate with you by e-mail or by posting notices on the MachineryMax INC Website. You also consent to the electronic formation of contracts and agreements between you and us and between you and any seller. You agree that all contracts, agreements, notices, disclosures and other communications that we or any seller provides to or forms with you electronically satisfy any legal requirement that such contracts, agreements, notices, disclosures, and communications be in writing, or that any signature to any contract or agreement be in writing. IF AT ANY TIME YOU NOTIFY US THAT YOU REVOKE THE CONSENTS CONTAINED IN THIS PARAGRAPH, YOUR REGISTRATION ON AND ACCESS TO THE MACHINERYMAX INC WEBSITE WILL BE IMMEDIATELY TERMINATED.

  14.1 SMS Marketing

By using our services, you agree to receive SMS messages from us, including promotional messages, updates, and notifications. You understand that standard message and data rates may apply, and you are responsible for any charges incurred by your mobile carrier.

Opt-in Requirement: You must explicitly opt-in to receive SMS messages from us. You can opt-in by providing your mobile phone number and confirming your consent to receive SMS messages.

Message Content: We will only send SMS messages that comply with applicable laws and regulations, including the Telephone Consumer Protection Act (TCPA) and the Cellular Telecommunications Industry Association (CTIA) guidelines.

Opt-out Instructions: You can opt-out of future SMS messages at any time by replying "STOP" to any SMS message from us or by contacting us through our website.

Data Protection: We will collect and store your mobile phone number and message content in accordance with our Privacy Policy (https://machinerymax.com/Home/PrivacyPolicy). We will not share your mobile phone number or message content with third parties without your consent, except as required by law or to facilitate the delivery of SMS messages.

15. NOTICES 
Notices shall be given to the Company by e-mail to Sales@MachineryMax.com and by certified mail, return receipt requested, to MachineryMax, Inc., Attention: President, 6660 Taylor Rd Unit 108 Punta Gorda, Fl 33950, or to such other address as may be designated from time to time. Notices to the Company shall be deemed to have been given five days after the date of mailing by certified mail, return receipt requested.

Notices to you will be sent by e-mail to the e-mail address given to the Company when you registered with the Company, or such other e-mail address as you may provide by e-mail to the Company from time to time. Notices to you shall be deemed to have been received 24 hours after the e-mail is sent.

16. THIRD-PARTY USAGE
Our website utilizes the YouTube API services provided by Google LLC for the purpose of allowing users to upload videos directly to YouTube from our platform. Please note that by using the YouTube video uploading functionality on our website, you are subject to Google's Privacy Policy (https://policies.google.com/privacy) and Terms of Service (https://www.youtube.com/t/terms). We encourage you to review these policies to understand how Google collects, uses, and protects your information when using their services.

 

Date: April 3, 2026

↓ Keep scrolling to unlock
I have read and agree to the Terms & Conditions Scroll to the bottom to unlock