Installed in 2017 with 312 hours actual use time.  This late model flat table CNC includes 3 Becker vacuum pumps and an automatic unloading conveyor.

Below specs are as taken from manufacturer's site.

WORKING LENGTH 98.4"

WORKING WIDTH 49.1"

HSK 63 ROUTER SPINDLE POWER 13.4HP

ROUTER SPINDLE SPEED 1,250 - 24,000RPM

TOOL MAGAZINE CAPACITY 8

PNUEMATIC REFERENCE 11

3 BECKER VACUUM PUMPS

X/Y/Z VECTOR SPEED 96/96/25 M/MIN

Z STROKE 9.6"

DUST EXTRACTION CONECTION SIZE (1) 160 MM

AIR VELOCITY MINIMUM 97TF/SEC

STATIC PRESSURE MINIMUM 2200 PASCAL

DRILL UNIT-

• Ball bearing arrangement provides for the compensation of forces from all sides and delivers the highest drilling quality. The more demanding the application, the more important this feature is.

• The clever arrangement of the drill spindle ensures a constant distance between the drill bit and the bearing, whether the spindle is extended or not. Together with the diameter of the sleeve, this feature ensures the highest lateral stability and precision during the drilling process.

• Integrated Mechanical Clamping System to ensure each drill spindle achieves proper depth regardless of material density and/or drill diameter 

GUIDE SYSTEM

The X, Y, and Z axes are all supported
on THK-style linear motion guides. These guides are engineered to produce straight line tracking at high travel speeds while providing stability in both the radial and lateral directions.

• The X axis is driven by two (2) helically- ground rack and pinion gear systems

• The Y and Z axes are driven by high- precision ball screw

  • Solid state drives and digital AC servo motors power the axes

  • Digital drive technique in X, Y and Z direction features:

  Maintenance-free motors with high-resolution optical encoders for precision and accuracy

  Digital drive control units guarantee high reliability 

MATRIX TABLE

A grooved phenolic MATRIX vacuum system is standard. It clamps down work pieces on the table surface. The grooves allow ef cient vacuum distribution; they also isolate table areas by inlaying a rubber seal and/or by accepting vacuum pods to af x small parts. Rubber gasket material is included.

• Working table length: 2500 mm (8' / 98.4 Inches)

• Working table width: 1250 mm (4' / 49.2 Inches)

• Workpiece thickness: maximum 100 mm (3.94 Inches)

• Can be equipped with optional Pod System for elevating parts 

• • Semi-Automatically divides the matrix table into 3 vacuum zones: 4’x8’, 4’x5.25’, 4’x2.5’

  • 3 vacuum fields 

VERTICAL ROUTER SPINDLE

The BENZ/ZIMMER GROUP HSK63 spindle motor is rated at 18 HP, but the machine operates it at a maximum capacity of 13.4 HP. This output meets virtually all application needs, reduces energy costs, and increases longevity.

• Includes an automatic tool change feature with the tool change magazine

• Direction of rotation: right hand / left hand

  Speed: 1,500 - 24,000 rpm stepless programmable

  Drive: frequency controlled to a maximum capacity at the tool: up to 8.5/10kW (11.4/13.4 HP) in continuous and intermittent operation (S1/S6 - 50%)

  Spindle lubrication: permanent grease

  Bearing: hybrid bearing (ceramic) with little friction, higher stiffness, and maximum operating life

  Fan cooled
  Central dust extraction 

MULTI ZONE PROCESSING

The table and control interface on the Vantech Series allow the operator to simultaneously load multiple programs at up to 4 zero points (number of zero points determined during machine speci cation). The machine then optimizes drilling and routing routines and runs the multiple programs as a single le. This is an important feature for those who may use the Vantech Series machine as a “point to point” machining center or provide back-up to that style machine already in operation on their shop oor. An example of this in production is an operator loading smaller raw materials to the machines multiple reference points and running the parts in a single optimized machine cycle. 

AIR JET

Four flexible air jets are integrated into the extraction hood, providing a cool, clean, and ef cient machining area. Air jets are activated via soft key at the control panel 

AUTOMATIC TOOL CHANGER

To increase flexibility and decrease cycle time, an automatic tool changer (ATC)
is located near the left of the machine framework.

• Tool holder: HSK63

• 7 tool places in tool magazine

• Tool weight: maximum 5 kg (11.02 lbs.) including HSK cone

• Tool diameter: 135 mm max when equipped with 7 tools

• Tool change time: approximately 10 - 18 seconds

• Tool loading: via integrated pick-up place at the tool 

AUTO TOOL CHANGER LOADING POSITION

From a single position, operators can easily and quickly insert and remove tools.

Tools are manually inserted into the loading device, positioned close to the left front of the machine for easy access. The machine retrieves the tool and selects the rst available position in the tool magazine, deposits the tool, and updates the tool database.

To remove tools, the machine deposits tools in the loading position and automatically removes the tool from the active tool database. Sensors prevent the machine from depositing a tool when another tool is present. 

TOOL LENGTH CONTROL

A heavy duty tool length control system is
a standard feature. To maintain accuracy, the machine measures the length of the tool and veri es it against the tool data stored in the machine control. This reduces human error, eliminates the need for multiple test

cuts, and saves set-up time. 

7 SPINDLE VERTICAL DRILL BLOCK

Drill blocks increase the processing speed of the machine by allowing drilling operations to be accomplished without changing tools. Spindles in the drill block can be selected individually to meet different needs simultaneously.

• Spindle clamping achieves precise drilling depth

• Stroke Z-direction: 60 mm

• Drilling depth: maximum 38 mm (up to 55 mm for special borers)

• Direction of rotation: right hand/left hand

• Speed: 3,450 rpm

• Power: 1.5 kW

• Shaft diameter: 10 mm

• Total length of drill: 70 mm

• Drilling diameter: maximum 35 mm

• Distance between spindles: 32 mm

• Type of spindle: individually selectable

• Spindle con guration: 4X – 3Y 

REFERENCE PINS

The machine has 11 reference pins for precise mounting. Pins are automatically actuated and surveyed by the machine control to prevent operation when the pins are not completely depressed.

• 2 are located at the rear of the machine

• 1 is located at the right rear right

• 6 are located at the front

• 1 is located at the front right

• 1 is located at the front left 

The Vantech series features a Microsoft Windows 7 based state-of-the-art powerTouch control with software. The woodWOP 7 programming system (included) offers powerful drawing functions to simplify programming for operators without CNC experience and provide the premium features required to satisfy advanced users. A copy of the program is also included for installation on an of ce PC for off-line programming. 

The woodWOP 7 generation of CNC programs enables:

• Graphical tool selection from your database

• Production list administration

• Graphical presentation of work zones

• Clear error messaging

• 3D NC-simulation and time calculation: 1 license

• Automated spoil board maintenance program for quick and easy surfacing