currently in the “HOMAG Room” at UBC (University of British Columbia).  The HOMAG room is a small showroom which we have at UBC segregated from the rest of the woodworking program.

OPTIMAT BHP008/VANTECH480 CNC-controlled processing centre in

          traversing gantry construction centre

1. BASIC MACHINE

• -  Solid machine frame in rigid trasversing

              gantry execution
  

• -  Gantry movable in X-direction

• -  Cross support movable in Y- and Z-direction

• -  Paint Grey RDS 240 80 05

• -  Direct extraction at the processing unit and

              separate connection for the extraction
              device (on site)
  

  2. GUIDING SYSTEM AND DRIVE TECHNIQUE

• -  High quality linear guiding system

• -  Toothed rack drive (synchronous drive) in

  X-direction and ball bearing spindle in

  Y- and Z-direction Travel range of the axes:

  X = 3710 mm (146,1 Inch)

Y = 1652 mm ( 65,0 Inch) Z = 245 mm ( 9,6 Inch)

Digital drive technique in X-, Z-direction
Axis speeds:

Y- and

Vector speed:
X/Y = 96 m/min

Z = 25 m/min

Consisting of:
- maintenance free motors with

                             high
resolution optical encoders guarantee

high accuracy
- digital drive control units guarantee high

reliability

3. MATRIX TABLE 8'/4', 2500 X 1250 MM System MATRIX with grid grooves for clamping of templates or workpieces. Grid grooves for inlaying of a rubber sealing. Various vacuum cup types are optionally available.

Consisting of:

• -  Vacuum system for clamping of the

    on the complete workpiece table
  

• -  The working table is divided into areas (please refer to the layout

workpieces

3 vacuum

drawing). 3 vacuum generators with a total vacuum capacity of 270/324 m3/h, 50/60 Hz (3 x

90/108 m3/h, 50/60 Hz) are directly connected with the vaccum areas via a distribution device.
One of the three vacuum generators serves as master.

To save energy the further two vaccum pumps can be switched on if required via softkeys in the operating panel.

• -  3 pneumatically lowerable AL-workpiece stops incl. electr. surveillance of lower cylinder position
  Arrangement: as per enclosed layout

• -  15 meter rubber sealing

Working table
length:
Working table
width:
Workpiece
thickness:

2500 mm (8', 98,4 Inch) 1250 mm (4', 49,2 Inch) max. 100 mm (3,94 Inch)

4. CONFIGURATION BASIC MACHINE
R1-HSK63-9 KW, TC7, TOOL LENGTH CONTROL

R1-HSK63-9 KW
Automatic tool change spindle in combination with a tool change magazine.
Working
capacity: refer to separate layout Tool holder: HSK63
Tool changing: automatic
Direction
of rotation:
Speed:

right hand / left hand
1,250 - 24,000 1/min stepless programmable frequency controlled AC-motor

up to 7.5/9 kW (10/12 HP) in continuous and intermittent operation (S1/S6 - 50%)

permanent grease lubrication hybrid beariing (ceramic), little friction, higher stiffness and max. operating life

Cooling:
Dust extraction:central

AIR JET
An air jet is integrated in the extraction hood. Activation via softkey in ther operating panel.

TC7
Automatic tool change magazine for 7 places.

Drive:
Max. capacity at the tool:

Spindle
lubrication:
Bearing:

TOOL LENGTH CONTROL
Suitable for length measuring of shaft tools. After tool change via the pick-up place a control of the length is carried out and checked with the tool data file.

5. powerControl
Modern control system which bases on Windows PC

Hardware:

• -  PLC control according to international

    standard  IEC 61131
  

• -  Operating system Windows XP (US) embedded

• -  17 Inches TFT-flat screen

• -  USB connection at the operating panel

• -  EtherNet connection 10/100 MBIT RJ45 (without

  switch)

  Software:

• -  powerControl CNC-core with:

  • -  path control in all axis and parallel sequences by multi-channel technology

  • -  look-ahead-function for optimal speed at the transitions

  • -  dynamic pre-control for top precise accuracy of the contour

• -  powerControl software package with graphical operating programs:
  - woodWOP:

  for graphical, dialogue-oriented generation

of CNC-programs

• -  TOOL DATA BASE:

    with graphical operator guide to manage
  

  tool data

• -  PRODUCTION LIST SOFTWARE:

  for management and creation of product lists for individual manufacturing. Hereby production sequences, target amounts and processing information can be stored

• -  MACHINE DATA RECORDING SCHULER MDE Basic: for recording of produced workpiece quantities

• -  SOFTWARE FUNCTION MOVING
  Function to manufacture a right program at the left hand workpiece stop and a left program at the right hand workpiece stop

• -  3D NC-SIMULATION AND TIME CALCULATION Software for graphical simulation of a CNC- program in 3D including time calculation with a precision of +/- 10%. Optical error display and vacuum positioning control. Note: Not suited for motorically movable

  consoles (AP-table)

• -  SOFTWARE FUNCTION OPTIMIZATION OF SPACE

  OCCUPATION:
  Extension of the location for machines with MCC by the possibility to connect work- pieces over the whole table or for the respective working field. This includes an additional optimization of the processings in order to save tool changes (in case the processing sequence of the individual programs allow it)

  Software package for external PC:
  

• -  woodWOP:

  for graphical, dialogue-oriented generation

  of CNC-programs

• -  woodWOP DXF Basic:

  exchange from 2D-CAD-programs to woodWOP - import of 2D-DXF-files
  - conversion is effected acc. to fixed

      profiles (rules)
  

• -  display of geometry, layer and drawing elements

• -  generation of the woodWOP-program

• -  woodAssembler:

  to visualize woodWOP-programs (MPR) in 3D. This software enables the construction of individual workpieces to finished objects.

• -  woodNest Basic
  Software for the Nesting of woodWOP-program

  • -  manual positioning and turning of work-

          pieces by drag and drop
    

  • -  visualization of spacing between

    workpieces

• -  woodWOP MOSAIC

  Software for woodWOP-data administration with graphical preview 'thumbnails'

  • -  with this software woodWOP-data files

          and complete directories can be managed
    

          from the graphical point of view
    

  • -  Programs can be administered by drag

    and drop

• -  woodType

  Software to generate routing contours for caracters and texts in all available Windows-True-Type-fonts
  Can only be operated with Windows NT4, W2K resp. XP or Vista

  Copy protection of all software licences via the HOMAG Group licence server. The product must be activated following the installation. Activation via www.eparts.de

  6. SECURTIY AND SAFETY UNITS See technical data sheet

  7. DOCUMENTATION AND TECHNICAL DATA Technical connection values for pneumatics, dust extraction and electrics as per enclosed technical data sheet. Documentation on CD including spare parts catalogue and wiring diagram.

  8. ELETRICAL CONNECTION
  Voltage: 480V, 50/60 Hz, 3 phases

DRILLING AGGREGAT V7
Vertical drilling block with 7 spindles. Special feature: Spindle clamping to achieve

Page : 7

G.0004

Number : 0242 1 off
EXTENSION OF THE STOP SYSTEM, FRONT RIGHT HAND SIDE

- 4 pneumatically lowerable AL-workpiece stops fix mounted at the working table (front right hand side) incl. electr. surveillance of lower cylinder position

Note: Not in combination with pneumatically lowerable stop fence.

Working: capacity: Stroke Z-direction: Drillin depth: Direction of rotation: Drehzahl: Drive:

the drilling depth safely. refer to separate layout

60 mm
max. 38 mm

right hand/left hand 2800/3450 1/min (50/60 Hz) 1.5 kW
d = 10 mm

Shaft diameter:
Total length
of drill:
Drilling
diameter:
Distance between
spindles:       32 mm
Type of spindle:individually selectable
Arrangement:    as per enclosed layout