SCM GROUP MODEL #K560-ERT/HP AUTOMATIC EDGEBANDER

YEAR 2017 MANUFACTURED MACHINE

230 VOLT, 3-PHASE

SERIAL #AH/120229

**MACHINE SOLD NEW FOR AROUND $90,000.00 

About SCM GROUP

K 560 HP/ERT – Single Sided Edgebander

Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8mm.

Machine Base

The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.

Electronic Top Pressure Beam

All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings.

Capacities and Speed

Glue Station

•   Edgebanding thickness: .4mm - 8mm (.016-5/16”)

•   Guillotine capacity: 3mm

•   Feed speed: 40/60 ft/min.

•   Panel height: 3/8” min – 2 1/8” max

•   Minimum panel length: 5 1/2”

•   Minimum panel width: 2 3/8”

•   Minimum distance between panels: 20”

Teflon coated glue pot to facilitate glue changeover. Warm up time is approximately eight to ten minutes. The unit is also equipped with a quick disconnect plug for changing from one pot to another. Pneumatic locking of the glue roller at the end of the panel to prevent any excess glue on the trailing edge of the panel.

K560 HP/ERT

Founded in 1952 in Rimini, Italy, SCM

Group S.p.A is the leading designer,

manufacturer and distributor of innovative

and technologically advanced solutions for woodworking, glass, stone, plastic, metals

and composite materials. SCM Group’s line

of products range from the "Classic" entry-

level manual equipment to the turnkey fully-

automated "Industrial" solution, and all

products use the best Italian components possessing the renowned “Made in Italy”

high level of quality and control. With

headquarters in Rimini, SCM Group

operates through 18 production facilities located throughout Italy and 19 foreign subsidiaries with a total workforce

of 3.100 employees. Using an extensive distribution network, SCM Group exports over 80% of its production,

covering 120 countries through subsidiaries, distributors and agents.

Servo Driven Pressure Section

There are a total of four pressure rollers for pressing the banding to the workpiece edge. The first roller is powered and is also Teflon coated to prevent the banding material from slipping. The three idle rollers have opposing one-degree tilt to provide extra pressure along the top and bottom edge. The machine comes standard with an automatic strip magazine. Comes standard with servo driven positioning that requires no manual intervention from the operator. The glue pot is Teflon coated and has a 5.5lb. capacity. Comes equipped with a quick change feature that allows the operator to remove the glue pot in less than two minutes.

Startouch Controller

The K 560 comes equipped with the “Startouch” controller. This controller features a 12" touch screen display. Capable of storing 100 programs. Color graphic display of all the working units. Tracks production information, diagnostic information and monitors maintenance schedules. Choose mm's or inches, as well as 5 different languages. Swivels 270 degrees and tilts for easy access.

Anti-Adhesive

The machine comes equipped with an anti-adhesive unit positioned prior to the pre milling unit. It prevents the buildup of glue on the top and bottom of the panel. The unit comes with two independent nozzles and a tank of anti- adhesive liquid.

K560 HP/ERT

Adjustable Infeed Fence

The infeed fence is manually adjustable with a mechanical digital readout for determining stock removal.

RT-V Pre-Milling Station:

To rectify/clean panels already sized and squared before the edge is applied. The unit is composed of two high frequency motors (2.0hp) with jumping action controlled through the PLC. The cutting heads are adjustable vertically. Diamond cutters are standard with 49mm height. 

K-SEL 2” End Trimming Station

This unit is composed of two independent .50 hp motors mounted on THK guides. End trim utilizes a draw cut system for reduced blade projection on thick panels. The unit comes standard with automatic tilting of the unit from the control panel with two preset positions.

K560 HP/ERT

R-HP Multi Edge 2R Trimming Station

This unit is composed of two independent .7 hp motors operating at 12,000 rpm. It comes standard with servo positioning to process TWO different radii and infinite thin edges all through the controller. Independently controlled positioning, ie radius on top and straight edge on the bottom. Four different controlled axes adjustments. The unit has top/bottom/side copy wheels. The motors have quick release plugs to facilitate tooling changes. Unit comes equipped with the nesting package from the factory.

“ROUND-X” Multi Edge Corner Rounding Unit:

Two independent .50hp motors that slide on THK guides ensuring the highest quality finish. Servo positioning allows for the finishing of various thin edges and thick edge. Two controlled axes adjustments through the controller. Unit is designed to work as an additional set of trimmers for rounding the top/bottom as well as the front/rear corners of work piece with 3mm PVC edges. The unit is equipped with front and lateral copying devices and pneumatic blowers to clean the panel. Dust shrouds surround the cutter and travel with the unit as it trims. The unit can go from thin tape to 3mm PVC, through the controller, with no manual adjustments by the operator.

K560 HP/ERT

RAS Multi Edge 2R Profile Scraping Station

The profile scraping station designed to remove knife marks from thick PVC. The unit is equipped with servo positioning to process TWO different radii. Includes tool with two different radii, four controlled axes adjustments and the ability to independently control the top from the bottom. It has a large diameter horizontal copy wheel and side copy wheel device. Unit comes equipped with the nesting package from the factory.

K560 HP/ERT

RC-V Glue Scraping Unit

The unit eliminates any excess glue to help improve the quality of the glue joint. It comes standard with double copy wheels on the top and bottom of the panel, air blowers are standard to help keep the knives clean, the off fall is collected in the collection bin and it is pneumatically positioned through the controller.

SP-V Buffing Unit

The buffing unit has two .25 hp motors. It can also be tilted up to 12 degrees to provide a softer, more refined edge finish.

Acoustical Safety Enclosure

All working units are enclosed under an acoustical safety hood to reduce noise and prevent accidents. The hood has a safety microswitch which prevents the machine from operating when the hood is open.

Centralized Dust Extraction

Machine comes with two 3” ports for the premilling station, two 2” ports for the top and bottom trim station and one 3” port for the 3mm collection bin for extraction.

K560 HP/ERT

Technical Specifications

K560 HP/ERT    

Glue Pot Unit: Heating Time Glue Capacity

Pre-Milling Unit: Horsepower RPM
Height

Max. Stock Removal
End Cutting Trimming Station:

Horsepower RPM
Tilting

Edge Trimming Unit: Horsepower
RPM
Cutting Tools

Corner Rounding Unit: Horsepower
RPM
Cutting Tools

Scraping Unit: Knife Radius

Buffing Unit: Horsepower RPM Diameter/Bore

Feed Motor Horsepower
Feed Speed
Frequency Converter
Dust Hood Diameter Pneumatic Operating Pressure

Approx. 8-10 min.

5.5 lbs.

2.0 HP (2)

19,000 RPM

49mm

Adjustable

.25 HP (2)

12,000 RPM

2 preset positions

.70 HP (2)

12,000 RPM

Combination Cutters

.50 HP (2)

12,000 RPM

3mm Radius

3mm

.25 HP (2)

2,800 RPM

152mm/17mm

2 HP

40/60 FPM

200 Hz

Per Drawing

90 PSI